Author Topic: I need a Veco 19 Backplate and NV (RC Engine) (Read 949 times)

Crist Rigotti · « **on:** June 27, 2014, 10:56:31 PM »

Anybody have these?

Thanks

Gerald Arana · « **Reply #1 on:** June 28, 2014, 08:19:05 AM »

Actually I have a couple of them that I will be putting on Da Bay in a week or so. They have a neat little muffler that fits into that exhaust stack and blocks/fastens to those holes in the exhaust stack.

I'm selling them for someone else and they are for CL!

Stay tuned, Jerry

Air Ministry . · « **Reply #2 on:** July 03, 2014, 07:11:14 AM »

All K&B ( Veco ) needles are the same fred . Allmost all - anyway . somer just needles , freded wire .
the Al oominum ones or the Brass ones fit . Belt the wire if it shuts wrong , and solder it if loose then .

Jim Thomerson · « **Reply #3 on:** July 03, 2014, 10:03:22 AM »

I have an extra Torp 19 backplate which might fit. Glad to send it as a small step toward getting my shop reorganized.

Jim Kraft · « **Reply #4 on:** July 03, 2014, 03:14:52 PM »

Jim, I have a Torpedo and a Veco 19 case and crankshaft that are new, and the back plates are different. The Torpedo is smaller. I don't have any needles either.

Andrew Tinsley · « **Reply #5 on:** July 04, 2014, 01:33:31 PM »

Mecoa still make the Veco 19 so parts should be available from them.

Andrew.

James C. Johnson · « **Reply #6 on:** July 10, 2014, 08:20:41 AM »

I have a BP... Jim

Author Topic: I need a Veco 19 Backplate and NV (RC Engine) (Read 949 times)

Crist Rigotti

I need a Veco 19 Backplate and NV (RC Engine)

Gerald Arana

Re: I need a Veco 19 Backplate and NV (RC Engine)

Air Ministry .

Re: I need a Veco 19 Backplate and NV (RC Engine)

Jim Thomerson

Re: I need a Veco 19 Backplate and NV (RC Engine)

Jim Kraft

Re: I need a Veco 19 Backplate and NV (RC Engine)

Andrew Tinsley

Re: I need a Veco 19 Backplate and NV (RC Engine)

James C. Johnson

Re: I need a Veco 19 Backplate and NV (RC Engine)