Author Topic: Stock shim for ST 46 (Read 641 times)

Manuel Cortes · « **on:** October 30, 2006, 06:37:33 AM »

Hello all.
I´ve some G21 46, but as all have been used (or abused

), don´t know exactly the stock shim used in the 46´s.
If some person knows it, will be apreciated.
Regards.
Manuel.

EddyR · « **Reply #1 on:** October 31, 2006, 05:49:22 PM »

I have seen some new never run motors with .010 and some with .020 Not two .010 's but a single .020 gasket. I think .010 is the norm.
Ed

RandySmith · « **Reply #2 on:** October 31, 2006, 08:29:25 PM »

Quote from: Manuel Cortes on October 30, 2006, 06:37:33 AM

Hello all.
I´ve some G21 46, but as all have been used (or abused ), don´t know exactly the stock shim used in the 46´s.
If some person knows it, will be apreciated.
Regards.
Manuel.

HI Manuel

You can use between 10 to 30 thou. depends on which version and what head it has on it. I would start with 15 to 20 thou , with teh squish head, and just go from there

Randy

Manuel Cortes · « **Reply #3 on:** November 01, 2006, 09:26:57 AM »

Thanks very much, friends.
Regards.

Author Topic: Stock shim for ST 46 (Read 641 times)

Manuel Cortes

Stock shim for ST 46

EddyR

Re: Stock shim for ST 46

RandySmith

Re: Stock shim for ST 46

Manuel Cortes

Re: Stock shim for ST 46