Author Topic: small case johnson 35 (Read 1221 times)

old fart · « **on:** March 06, 2006, 08:04:38 AM »

HI RANDY; Just got a johnson 35 small case, only other johnson i have is a 29R it has a restrictor in the venturi ,should the 35 have one also?& if so what size [dia.]spray bar should i be using ,or could i not use the t he restricton,with a larger {dia.] spray bar? thanx in advance for your help

wmiii · « **Reply #1 on:** March 06, 2006, 05:43:45 PM »

Not Randy but, I just checked my NIB small case engines and they
don't have a restricter, the needlevalve body looks like it's very close to standard ST size.

Walter

old fart · « **Reply #2 on:** March 07, 2006, 06:09:04 AM »

thanx walter ; just want to say thank you for the infromation, wasent sure ,sronome of older engines ie. torps had them johnson 29 r has one?

RandySmith · « **Reply #3 on:** March 07, 2006, 10:27:15 AM »

HI Ron

I checked mine also and found no restictor, Are you going to use this engine in a plane? Is so what type?
Typically you would want somewhere between a 260 and 290 hole in the venturie if you have a ST size spraybar.

Regards
Randy

old fart · « **Reply #4 on:** March 07, 2006, 12:25:18 PM »

HI RANDY; THANKS FOR THE EFFORT , TWAS THINHINGE BUILDING AN ARMADILLO [FULL FUCE ] MAGICIAN,OR A VIKING? ALTHOUGH THE ENGINE SEEMS TO HAVE GOOD COMPRESSION.I WILL NEED TO RUN IT FIRST AND SEE..

Garf · « **Reply #5 on:** March 11, 2006, 06:37:20 PM »

My small shaft Johnson 35's are among the best running engines I own.

Author Topic: small case johnson 35 (Read 1221 times)

old fart

small case johnson 35

wmiii

Re: small case johnson 35

old fart

Re: small case johnson 35

RandySmith

Re: small case johnson 35

old fart

Re: small case johnson 35

Garf

Re: small case johnson 35