Author Topic: OS 40FP (Read 624 times)

Steven Kientz · « **on:** March 20, 2011, 01:35:20 PM »

I bought an OS 40 fp yesterday at a swap meet. I need to to order a venturi and NVA from Tower, which venturi? I know some use the small venturi on the LA46, does it work on the 40 fp as well? I also need to replace a broken plastic backplate on a LA46, does anyone have the Tower part # for a metal replacement? I did some research on it yesterday but the part number(40 fp part#) showed a backplate for a .21 car engine.

Thanks
Steve

Bill Little · « **Reply #1 on:** March 20, 2011, 09:23:45 PM »

Curtis Shipp, a member here, sells machined metal back plates for the OS engines. I have several and they are very, very nice. I do not think Tower has had any of the metal back plates that fit the .35/.40 FP, the Tower .40, or the .40/.46 LA (same back plate for all) for quite a while. I think they do still stock the .20-.25FP/.25LA metal back plates, and possibly the .15FP/LA metal ones.

I don't know if Randy has them in stock, he does have a lot of OS parts..

Big Bear

Steven Kientz · « **Reply #2 on:** March 21, 2011, 02:17:51 PM »

Thanks Bill, I'll look into that.

Steve

Author Topic: OS 40FP (Read 624 times)

Steven Kientz

OS 40FP

Bill Little

Re: OS 40FP

Steven Kientz

Re: OS 40FP