News:



  • June 20, 2025, 07:16:50 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: FOX 45 C/L, BB, SCH, Ring - Part Number 14600  (Read 811 times)

Offline David Felinczak

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 51
  • Always Remember
FOX 45 C/L, BB, SCH, Ring - Part Number 14600
« on: May 21, 2010, 04:32:06 AM »
Can this motor be modified for stunt (4-2 break)applications?
I have a new In-Box never run.
Date Stamp in Box is Feb. 1996.

Thank you in advance for all responses.

David F.
Logged
David Felinczak
865337

Offline Jim z

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 59
Re: FOX 45 C/L, BB, SCH, Ring - Part Number 14600
« Reply #1 on: May 22, 2010, 12:23:23 AM »
This engine can be modified to run well , I had one reworked by Lew Wollard
 a few years back and ran very well, although a bit on the heavy side.
Logged

Offline David Felinczak

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 51
  • Always Remember
Re: FOX 45 C/L, BB, SCH, Ring - Part Number 14600
« Reply #2 on: May 22, 2010, 07:42:38 AM »
Jim,Z.

Thank you for the follow up.

The weight is actually good for the Profile Pathfinder.

I currently am flying a Brodak Pathfinder with a Randy Smith
G51 ST and it balances out perfectly.

I did not have to add any weight to the nose. The aircraft can be tail
heavy if you are not careful in construction.

David F.                                                         
Logged
David Felinczak
865337

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: