stunthanger.com

Engine basics => Engine set up tips => Topic started by: David Felinczak on May 21, 2010, 04:32:06 AM

Title: FOX 45 C/L, BB, SCH, Ring - Part Number 14600
Post by: David Felinczak on May 21, 2010, 04:32:06 AM

Can this motor be modified for stunt (4-2 break)applications?
I have a new In-Box never run.
Date Stamp in Box is Feb. 1996.

Thank you in advance for all responses.

David F.

Title: Re: FOX 45 C/L, BB, SCH, Ring - Part Number 14600
Post by: Jim z on May 22, 2010, 12:23:23 AM

This engine can be modified to run well , I had one reworked by Lew Wollard
 a few years back and ran very well, although a bit on the heavy side.

Title: Re: FOX 45 C/L, BB, SCH, Ring - Part Number 14600
Post by: David Felinczak on May 22, 2010, 07:42:38 AM

Jim,Z.

Thank you for the follow up.

The weight is actually good for the Profile Pathfinder.

I currently am flying a Brodak Pathfinder with a Randy Smith
G51 ST and it balances out perfectly.

I did not have to add any weight to the nose. The aircraft can be tail
heavy if you are not careful in construction.

David F.