News:



  • May 09, 2024, 11:49:50 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Fox 049 spraybar  (Read 445 times)

Offline philip metzner

  • chevyiron420
  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 105
Fox 049 spraybar
« on: July 13, 2012, 02:18:50 PM »
I received my engine I bought on the bay and its pretty much as described except the spray bar is crushed. I think someone grabbed it with pliers. I had to drill the thing out so i have nothing left to measure. anyone have an idea what will work? The engine is the sport model, not the FAI.
Logged

Offline kenneth cook

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1468
Re: Fox 049 spraybar
« Reply #1 on: July 13, 2012, 04:22:58 PM »
                           Hello Phillip, I've made several purchases from this seller on Ebay. Items were delivered but some took a bit of time. All in all he provides a good service to Fox users. He has this and probably has much more. http://www.ebay.com/itm/232-VINTAGE-FOX-049-NEEDLE-VALVE-BODY-ENGINE-PART-710-/260997176335?pt=Radio_Control_Parts_Accessories&hash=item3cc4a4dc0f  Another provider of Fox.049 parts is Doug Martin. I don't have his contact, a quick search might reveal it though. Ken           I did find this I don't know if it's current dougsengines@hotmail.com
Logged

Offline philip metzner

  • chevyiron420
  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 105
Re: Fox 049 spraybar
« Reply #2 on: July 14, 2012, 06:40:44 PM »
I wanted to here the little engine run, so I polished down a testors NVA I had that was close. I made one run slow and rich and let it cool completely . The second run i set the needle on the wet side of full power. It turned the 5 1/2x3 tornado 16100 average rpm. The fuel draw seemed good, and it ran steady. Im very happy with it.
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here