Author Topic: Enya 45 Differences (Read 905 times)

Ed Carlaw · « **on:** August 01, 2023, 07:46:10 PM »

Can someone tell me the difference between the 6001 .45 and the 6002 .45 II? The front case looks a little different as in heavier duty but the crankcases look the same. Thanks.

Ed Carlaw · « **Reply #1 on:** August 01, 2023, 09:38:39 PM »

I forgot to say that they are Enya engines.

Dave_Trible · « **Reply #2 on:** August 02, 2023, 09:44:10 AM »

I have a handful of the 6001's but have stayed away from the 6002. As I recall in an effort to extract a little more power from the basic design the 6002 has a larger internal crankshaft bore and intake opening for more air/fuel passage. Timing and compression may also have been changed. These changes I've read makes the 6002 less user friendly as a stunt engine and the crank itself weaker which could lead to failure. I recall someone using aluminum tubing to sleeve the crank bore back down in the range of the 6001 to correct the bad traits.

Dave

Ed Carlaw · « **Reply #3 on:** August 02, 2023, 10:03:03 AM »

Thanks Dave, looks like the 6002 will be staying on the shelf. I have two 6001's, one with the venturi built into the front housing and the other one with a standard bolt through setup. You can see the difference in the front housing on both engines. Ed.

Author Topic: Enya 45 Differences (Read 905 times)

Ed Carlaw

Enya 45 Differences

Ed Carlaw

Re: Enya 45 Differences

Dave_Trible

Re: Enya 45 Differences

Ed Carlaw

Re: Enya 45 Differences