News:



  • June 22, 2025, 10:28:48 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: CS 36P engine  (Read 1101 times)

Offline rich gorrill

  • 23 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 393
CS 36P engine
« on: September 16, 2013, 04:55:45 AM »
Hi guys, crusin E-Bay and came across a sale on a CS 36P engine. Has anyone ever heard of these engines. It is brand new and looks pretty good. The box shows it is made in Japan. It is a control line motor with needle valve and venture. It also comes with a strange looking muffler, very long. Any info would be appreciated. I don't think I'll bid on it I am just curious if anyone has ever used this engine.

TIA,  Rich
Logged

Offline richardhfcl

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 70
  • AMA 82448
Re: CS 36P engine
« Reply #1 on: September 16, 2013, 06:18:33 AM »
Rich,

     I had thought that CS engines were manufactured in China and that the first series of .049's

marketed by Brodak were made by CS.  I have no knowledge of their QC, however.  Let us know

how the engine works out for you should you purchase it.
Logged
Richard Ferrell

AMA 82448

Offline BillLee

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1345
Re: CS 36P engine
« Reply #2 on: September 16, 2013, 08:22:58 AM »
Quote from: rich gorrill on September 16, 2013, 04:55:45 AM
Hi guys, crusin E-Bay and came across a sale on a CS 36P engine. Has anyone ever heard of these engines. It is brand new and looks pretty good. The box shows it is made in Japan. It is a control line motor with needle valve and venture. It also comes with a strange looking muffler, very long. Any info would be appreciated. I don't think I'll bid on it I am just curious if anyone has ever used this engine.

TIA,  Rich

Perhaps you're looking at a different CS 36P engine on eBay than I am, but both the box and the casting of the engine backplate clearly says "Made in China". Looks like another OS clone.
Logged
Bill Lee
AMA 20018

Offline rich gorrill

  • 23 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 393
Re: CS 36P engine
« Reply #3 on: September 16, 2013, 08:31:48 AM »
You are right, it does say made in China. Does anyone know if this was the only engine made in China?
Logged

Offline 55chevr

  • 2016 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 742
Re: CS 36P engine
« Reply #4 on: September 16, 2013, 12:57:51 PM »
That is a rough casting ... It looks like an OS FP knock off with more fins added. 
Logged
Joe Daly

Offline Andrew Tinsley

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1345
Re: CS 36P engine
« Reply #5 on: September 16, 2013, 01:35:37 PM »
Gentlemen,
CS has often been interpreted as Chinese S--t and to be frank the usual quality is such as to regard the engine as a kit of parts that need fixing. They do make the occasional good engine. I have an ED Hunter replica and that is excellent, however that doesn't often happen. Unless you are a good machinist, leave well alone, you can do without the hassle.

Regards,

Andrew.
Logged
BMFA Number 64862

Offline Timothy Payne

  • Mr Payne
  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 67
  • Classic Racer
Re: CS 36P engine
« Reply #6 on: September 18, 2013, 07:36:49 PM »
Leave that one, what you need is an OS 35. There are still a few of these around as they crop up on ebay now and again, if you can find a good one.


Good luck,



Tim
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: