News:



  • May 01, 2024, 07:46:52 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Brodak .40 dimensions  (Read 1127 times)

Offline wwwarbird

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7982
  • Welcome to the Stunt Hanger.
Brodak .40 dimensions
« on: October 09, 2006, 08:20:15 AM »
Does the Brodak .40 have the same mounting dimensions and length as a Fox .35 so it could be a direct swap with no mods to the model? The length is also important to me in this case, because of built in spinner gap spacing on the model.

Thanks!
Logged
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Offline Ralph Wenzel (d)

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 848
Re: Brodak .40 dimensions
« Reply #1 on: October 09, 2006, 09:17:24 AM »
The simple answer is "No".  If you want a drop-in for the Fox, I believe a Double Star .40 is the only way to go. The Brodak was designed to be a drop-in for the OS Max .35S.
Logged
(Too many irons; not enough fire)

Ralph Wenzel
AMA 495785 League City, TX

Offline wwwarbird

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7982
  • Welcome to the Stunt Hanger.
Re: Brodak .40 dimensions
« Reply #2 on: October 09, 2006, 11:58:03 AM »
Thanks Ralph. I knew the Double Star would go, but wasn't sure on the Brodak. Didn't know the Brodak was the same as the OS-S though-good info! ;D

Logged
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12671
  • Second in COMMAND
Re: Brodak .40 dimensions
« Reply #3 on: October 11, 2006, 07:46:36 AM »
The Brodak has a longer nose.  ;D

Bill <><
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Bob Reeves

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3415
    • Somethin'Xtra Inc.
Re: Brodak .40 dimensions
« Reply #4 on: October 11, 2006, 11:22:45 AM »
Just to summarize, I removed an OS 35S from my built up fuse Omnium and dropped in a Brodak 40, the needle valve was off by about 1/16th, other than that it was a perfect fit.
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here