The tuned pipe motors like a little more synthetic and I recommend a 15% synthetic, 7% castor blend or a 20% half and half with 1 ounce of Aero-1 fuel supplement. Although many use 1\2 – 1\2 with great success. This works very well in the Precision Aero , OPS and Max VF engines, Super Tigre Thunder Tiger, AERO TIGER and most all of these type engines..
For ABC, AAC ,ABL, ABC-R and ABN motors, start out in a very fast four-cycle and about every 45 seconds; pinch the fuel tube to kick the motor into a momentary two-cycle. These types of engines normally take more break-in time than do their iron lapped piston cousins . If you can run the motor in a fast four-cycle and without touching the needle, pinch the tubing to lean the motor into a two-cycle for 20 seconds or so, then it should go right back to a four. After breaking in the engine with a few tanks of fuel , you can start using the needle to cycle back and forth from 2 to 4 cycle. When it is broke in you should be able to hold a 2 cycle for 30 seconds or so, and come back to a 4 quickly by turning the needle richer . If not, it probably needs more running time.