News:


Advertise Here

  • October 30, 2020, 11:18:49 PM

Login with username, password and session length

Author Topic: *** Our new Cox International store ***  (Read 5728 times)

Bernie Eisele

  • Guest
  • Trade Count: (0)
*** Our new Cox International store ***
« on: August 09, 2009, 12:45:33 PM »
We would like to take the opportunity to thank Bob for welcoming us to Stunthanger.com  #^


As many of you know, after selling on eBay for years under the ID of "Xenalook", we finally opened our new off eBay store at http://coxengines.ca where you will receive the same exceptional customer service that you have become accustomed to with us.

We currently have over 200 different Cox products in stock and, having partnered with a leading model engine manufacturer in the USA for the acquisition of original Cox tooling, will be manufacturing Cox parts and accessories as time goes by.

For you C/L flyers that are using Dacron line, we have an incredible deal for you. We were able to acquire 50,000 spools of original Cox Dacron control line in 54 and 60 spools. This control line was manufactured in the USA aprx. 10 years ago.

We bought these spools from Cox at preferred pricing and are passing the savings along to you. We are selling them 2 for 99 cents or 10 for $3.95, an incredible deal!

http://coxengines.ca/product.php?productid=231&cat=0&page=
http://coxengines.ca/product.php?productid=232&cat=14&page=1

Cognizant that this is a C/L site, but for those of you that use micro servos, we also purchased thousands of these from Cox and are selling them for only $6.95 or 3 for $17.95, another incredible deal!

http://coxengines.ca/product.php?productid=201&cat=11&page=1
http://coxengines.ca/product.php?productid=229&cat=14&page=1

We welcome your posts in our forum and look forward to serving your Cox requirements for years to come.

Bernie and Xena



Offline Joe Yau

  • AMA Member
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 748
    • My CLPA Channel
Re: *** Our new Cox International store ***
« Reply #1 on: August 19, 2009, 10:14:41 PM »
Hi Bernie & Zena

I have a cupples of Cox TD.15 Special MK-II, and a Medallion .15RC. that could probably use a new Piston & Cylinder. I'm just wondering if you would have some Cox .15 parts?

Bernie Eisele

  • Guest
  • Trade Count: (0)
Re: *** Our new Cox International store ***
« Reply #2 on: August 20, 2009, 07:26:09 AM »
Joe,

Unfortunately, some mufflers, prop screws and spinners in production aside, we have no .15 parts at all. Try Coxmania on eBay; I did see Dan Sitter listing a .15 piston a few days ago.

Good luck!
Bernie


Tags: Cox 
 


Advertise Here