Author Topic: Sea Vixen-Cowl (Read 644 times)

Tom Niebuhr · « **on:** January 03, 2008, 11:15:14 AM »

Here is the cowl roughed out. It is a block with a 1/2" bottom added to extend aft to pickup the Landing Gear/Cowl tie down bolts. Only one bolt is required, but I have added a second just for cowl stability. The cowl now has to hollowed out.

We are getting closer now. It is time to make a check list of remaining items left to do; Tip Weight box; Leadout Guides; Permanent LG, fix nicks: etc, etc.

Dennis Adamisin · « **Reply #1 on:** January 03, 2008, 05:40:13 PM »

Tom:
That is REALLY looking good. This has to be the most ambitous of all the Sheeks airplanes out there- NOTHING is "normal". YOu are doing a great job of capturing and enhancing the Sea Vixen, both what Jack presented and the little touches that further enhance its realism.

I can only counter with song lyric parodies!

Bill Little · « **Reply #2 on:** January 04, 2008, 07:53:25 AM »

Tom, it looks more and more like a scale plane every time I see it! Awesome.

Author Topic: Sea Vixen-Cowl (Read 644 times)

Tom Niebuhr

Sea Vixen-Cowl

Dennis Adamisin

Re: Sea Vixen-Cowl

Bill Little

Re: Sea Vixen-Cowl