Author Topic: Jetco Dolphin (Read 900 times)

Alan Hayes · « **on:** July 12, 2007, 03:14:45 PM »

I am in the process of finishing up a Jetco Dolphin built from a Classic Air Models kit and I do not have any reference to the shape of the lower nose block other than a very faded side view. It looks as if there was only two side blocks and a nose ring. I have searched for pics and drawings and have looked at Lew McFarland's plans in Classic Era Drawings. Any front view drawings or pictures?....no big problem just wanted to try and get close to the original.

Alan

Lee Thiel · « **Reply #1 on:** July 12, 2007, 06:07:10 PM »

Hi Alan, Thats all there was to it. On mine one side (outboard) is curved from the nose ring down into the bottom line of the fuse. On the inboard side, I left open for the exhaust port. I can scan that part of the plan if you want and post.
Lee TGD

Alan Hayes · « **Reply #2 on:** July 13, 2007, 06:48:21 PM »

Thanks Lee, the scanning will not be necessary...you answered my question.

Alan

Author Topic: Jetco Dolphin (Read 900 times)

Alan Hayes

Jetco Dolphin

Lee Thiel

Re: Jetco Dolphin

Alan Hayes

Re: Jetco Dolphin