Author Topic: Brodak Tomahawk (Read 61208 times)

Fred DiMaria · « **on:** March 18, 2024, 08:37:05 AM »

Finally finished this model - happy to get it off my board. I am hoping to fly it this summer. It weighs 28.5 oz with the heavy wheels and spinner. Does anyone have any experience with this model, I built it from a Brodak kit. I used a lot of tips I learned from Sparky online.

Ty Marcucci · « **Reply #1 on:** March 18, 2024, 10:45:47 AM »

Personally I'd remove most, if not all, of that right rudder.. It will cause yaw, which will slow the model down, not in a good way..

Ty Marcucci · « **Reply #2 on:** March 18, 2024, 10:47:43 AM »

Nice looking model Fred.. What engine is that? OS or Brodak?

Fred DiMaria · « **Reply #3 on:** March 18, 2024, 11:25:16 AM »

It's an OS .25 FP - on the Rudder offset, I will give it a few test flights, but I agree, I may have to reduce the offset (and unfortunately cut into the finish - ughhh)

john e. holliday · « **Reply #4 on:** March 18, 2024, 05:48:40 PM »

As I have had both versions of the Tomahawk, don't sweat the rudder off set. It will do the pattern. May not win NATS but is a good plane. In fact I have both kits of the Tomahawk that I was going to build and power with OS LA 25's. But things happen.

wwwarbird · « **Reply #5 on:** March 18, 2024, 09:20:39 PM »

Looks great Fred, just like on the Brodak box! Should be a great combo with the FP-25, have fun!

Gerald Arana · « **Reply #6 on:** April 18, 2024, 07:28:38 PM »

`Fred;

I built one back in the late '50's or early 60's (?)

Unfortunately, I can't remember squat about it........................(I'm 84)

I also built a "Hot Rock" and it was just that! Had a Torpedo 29 twin stack on it.

Good luck, Jerry

Author Topic: Brodak Tomahawk (Read 61208 times)

Fred DiMaria

Brodak Tomahawk

Ty Marcucci

Re: Brodak Tomahawk

Ty Marcucci

Re: Brodak Tomahawk

Fred DiMaria

Re: Brodak Tomahawk

john e. holliday

Re: Brodak Tomahawk

wwwarbird

Re: Brodak Tomahawk

Gerald Arana

Re: Brodak Tomahawk