Been wanting to do this for a while and finally managed to get around to it. This is the plans for another FJ-4, this one is sized and updated so it would be competitive in profile, 350 sq/in, 44 inch wing span with a 31 inch fuselage. I reduced the wing sweep so a slider would be more effective while still retaining the look of the FJ. Made it overall smaller than my big FJ-4 and reduced the wing thickness a bit. Only item not on the plans is the slider. I would like to use a slit carbon tube on top of the wing, even with the wing sweep the leadouts can go about 4 1/2 inches behind the CG.

Wondering if anyone has or may know someone that has put the details of a carbon tube slider in CAD? Would sure save me allot of work. Also wondering what the best way is to cut the slot in the side of a carbon tube?

I really don't want to get into the kit business but am getting some pricing for laser cut parts and full size printed plans. Should by chance anyone might be interested once I get the pricing pined down I'll post what I find out.

The MO1 is around 340... After I finalized the wind sweep, wing tips and drew the plan outline it ended up at 350.. Figured that was a good number 

Good nuff Bob,  I'll be ready to start sumthun when I get home.  I suppose gettting one in the same shape as the last one is outta da question....
Doug, I like a little color on my planes also.
Lee TGD