Author Topic: Vector 40 (Read 1339 times)

sadams714441 · « **on:** January 30, 2007, 06:46:17 AM »

need some help mounting the bellcrank in a Vector 40 kit. The bellcrank that came with the Brodak kit is that a good bellcrank to use? Also it tells you to put #10 washers top and bottom with soilder, is that the best way or is there some other way ? Z bend the rods and such to connect the flap horn and the rod to the bellcrank... Is there a better way?

Steve

Leester · « **Reply #1 on:** January 30, 2007, 12:32:08 PM »

Steve: The method that comes with a Tom Morris set up is probobly the best, wheel collars and fuel tube.

sadams714441 · « **Reply #2 on:** January 30, 2007, 12:41:08 PM »

Thanks
I'll give that a try, so no soilder at all then?

Leester · « **Reply #3 on:** January 30, 2007, 01:35:22 PM »

Not in this application. When you have it all set up put thread locker on the wheel collar set screw.

Leester · « **Reply #4 on:** January 30, 2007, 01:43:50 PM »

As far as Z bending the pushrod, With this plane I think going with C/F pushrods and ball links is well worth it. Go with the best you won't regret it.

Author Topic: Vector 40 (Read 1339 times)

sadams714441

Vector 40

Leester

Re: Vector 40

sadams714441

Re: Vector 40

Leester

Re: Vector 40

Leester

Re: Vector 40