Link 1
Stunt Hangar YouTube
P.A.M.P.A.
AMA
Balsa Density Calculator
This topic
This board
Entire forum
Google
Home
Help
Tags
Advertise
Login
Register
News:
May 04, 2024, 10:58:12 AM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
stunthanger.com
»
Building Tips and technical articles.
»
Building techniques
(Moderator:
RandySmith
) »
Vector 40
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Vector 40 (Read 1329 times)
sadams714441
Trade Count:
(
0
)
Commander
Posts: 191
Vector 40
«
on:
January 23, 2007, 01:28:29 PM »
Vector 40
Logged
Steve Adams
Leester
2014 Supporters
Trade Count:
(
0
)
Admiral
Posts: 2530
Re: Vector 40
«
Reply #1 on:
January 23, 2007, 01:49:58 PM »
Steve, What engine you gonna put it in ?
Logged
Leester
ama 830538
John Miller
24 supporter
Trade Count:
(
0
)
Admiral
Posts: 1697
Re: Vector 40
«
Reply #2 on:
January 23, 2007, 02:23:12 PM »
Ditto what TY said.
I've one, built from the kit, powered with a Stalker .40 RE, and it's easily one of the best I've ever had the pleasure of flying.
jOHN Miller
Logged
Getting a line on life. AMA 1601
sadams714441
Trade Count:
(
0
)
Commander
Posts: 191
Re: Vector 40
«
Reply #3 on:
January 23, 2007, 02:25:54 PM »
Not sure what motor at this time, have a new Brodak 40 still in box, may spring for a PA from randy
Logged
Steve Adams
Bill Little
2017
Trade Count:
(
0
)
Admiral
Posts: 12671
Second in COMMAND
Re: Vector 40
«
Reply #4 on:
January 23, 2007, 10:13:40 PM »
Quote from: sadams7144 on January 23, 2007, 02:25:54 PM
Not sure what motor at this time, have a new Brodak 40 still in box, may spring for a PA from randy
Hi Steve,
Glad to see you have that one going. The Vector is a really good airplane! If you can, get the PA or an Aero Tiger 36. The Aero Tiger will definitely do a great job for a few less dollars, and you get Randy's help in the bargain. An Aero Tiger 36 is definitely a stronger engine than the Brodak 40. I would use the Brodak 40 (a good stunt engine) in a good classic plane like a Nobler.
Bill <><
Logged
Big Bear
<><
Aberdeen, NC
James Hylton Motorsports/NASCAR/ARCA
AMA 95351 (got one of my old numbers back!
)
Trying to get by
sadams714441
Trade Count:
(
0
)
Commander
Posts: 191
Re: Vector 40
«
Reply #5 on:
January 24, 2007, 02:34:14 PM »
Thanks Bill
I also have a ARF Nobler that I havent done anything with yet, I may take your advise and put it in that then,
Logged
Steve Adams
Bill Little
2017
Trade Count:
(
0
)
Admiral
Posts: 12671
Second in COMMAND
Re: Vector 40
«
Reply #6 on:
January 24, 2007, 07:37:27 PM »
Hi Steve,
Check with Randy on the PA 40UL, also. I am not sure how much more the 40 ultra lite is compared to the AT 36......... if you have the money...............
Bill <><
Logged
Big Bear
<><
Aberdeen, NC
James Hylton Motorsports/NASCAR/ARCA
AMA 95351 (got one of my old numbers back!
)
Trying to get by
sadams714441
Trade Count:
(
0
)
Commander
Posts: 191
Re: Vector 40
«
Reply #7 on:
January 26, 2007, 07:16:19 AM »
Bill
When making the rod to bellcrank, do you recommend using a ball link set-up? Or just go with z bend on rod end?
Logged
Steve Adams
Bill Little
2017
Trade Count:
(
0
)
Admiral
Posts: 12671
Second in COMMAND
Re: Vector 40
«
Reply #8 on:
January 26, 2007, 12:04:06 PM »
HI Steve,
Personally, I have been using a ball link on both ends of the flap and the elevator pushrods.
Bill <><
Logged
Big Bear
<><
Aberdeen, NC
James Hylton Motorsports/NASCAR/ARCA
AMA 95351 (got one of my old numbers back!
)
Trying to get by
Advertise Here
Print
Pages: [
1
]
Go Up
« previous
next »
Tags:
stunthanger.com
»
Building Tips and technical articles.
»
Building techniques
(Moderator:
RandySmith
) »
Vector 40
Advertise Here