Author Topic: Paging Randy Smith! ie: foam wings (Read 1267 times)

Bill Little · « **on:** March 07, 2006, 11:02:03 AM »

Hi Randy,
Since I have four of your foam wings here, another thread has prompted me to ask you this:
When skinning foam wings with Z-poxy and lots of weight placed on the cradles to cure, do you need to do anything to shim up the "lost" foam areas that the hot wire created when the panels are "cored"

??
Thanks!

RandySmith · « **Reply #1 on:** March 07, 2006, 11:14:54 AM »

HI Bill

I am putting about 50 pounds of weight on top of the glass that my cores are under, ( I do mine between 2 pieces of 14 x 36 glass ) I have never found any need to shim the inserts.
What I do ,is just push them back in the cores about an inch deeper.
The wings always keep the shape.

Regards
Randy

Bill Little · « **Reply #2 on:** March 07, 2006, 09:52:34 PM »

Thanks, Randy. That is pretty much what I have been doing.

Author Topic: Paging Randy Smith! ie: foam wings (Read 1267 times)

Bill Little

Paging Randy Smith! ie: foam wings

RandySmith

Re: Paging Randy Smith! ie: foam wings

Bill Little

Re: Paging Randy Smith! ie: foam wings