News:



  • June 19, 2025, 01:45:04 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Measuring Epoxy  (Read 1923 times)

Offline Tim Wescott

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12895
Measuring Epoxy
« on: February 13, 2013, 02:31:45 PM »
Brodak 30-minute epoxy resin is a different density than Brodak 30-minute hardener!!  I've been measuring larger amounts by weight rather than trying to estimate volumes, and wondering why I seem to persistently have more resin than hardener.  I just weighed each bottle -- there's a 20% weight difference with only a slightly different amount of epoxy in each.

I can cope.  But before you assume that equal weight implies equal volume -- check.
Logged
AMA 64232

The problem with electric is that once you get the smoke generator and sound system installed, the plane is too heavy.

Offline MarcusCordeiro

  • 2013 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1872
  • "Never fly faster than your shoulder angel"
Re: Measuring Epoxy
« Reply #1 on: February 13, 2013, 05:43:41 PM »
When I used to be an aircraft mechanic, the guys from the "epoxi" area weighted every mix they did, be it epoxi glue, resin or sealant, but according to the maintenance manual.
Just a reminder, the instructions say equal parts, meaning equal volumes, not equal weigh.
Anyway, good advice.

Marcus
Logged
Live to fly, fly to live
Aces High!

"There's no try. Do or Do not." - Master Yoda

"Wealth and fame, he's ignorant
Action is his reward, look out
Here comes Marcus, man..."

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: Measuring Epoxy
« Reply #2 on: February 14, 2013, 10:25:32 PM »
Most epoxies are to be measured by equal parts, however a few specs call for equal weight, best to check which...

Regards
Randy
Logged

Offline Tim Wescott

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12895
Re: Measuring Epoxy
« Reply #3 on: February 15, 2013, 12:15:44 AM »
This stuff is meant for equal parts.  My mistake was to assume equal densities -- I thought I might warn anyone who's about to make the same mistake as me.
Logged
AMA 64232

The problem with electric is that once you get the smoke generator and sound system installed, the plane is too heavy.

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22974
Re: Measuring Epoxy
« Reply #4 on: February 15, 2013, 08:42:10 AM »
I use the little measuring cups and go with equal parts.   I too have noticed the different densities and wonered about the guys that weigh the parts as they mix them.
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: Measuring Epoxy
« Reply #5 on: February 15, 2013, 11:34:00 AM »
Quote from: Tim Wescott on February 15, 2013, 12:15:44 AM
This stuff is meant for equal parts.  My mistake was to assume equal densities -- I thought I might warn anyone who's about to make the same mistake as me.

Yes I knew what you meant, some people may find, though, they have epoxy meant to be mixed by weight, few are , but I have 2 batches here that measure by weight. What ever you have, be sure to measure very accuratly because for some epoxies , that is critical, and they won't dry if not mixed right.

Regards
Randy
Logged

Offline FLOYD CARTER

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4503
    • owner
Re: Measuring Epoxy
« Reply #6 on: February 15, 2013, 12:17:32 PM »
If I mix up more than a few drops of epoxy, I first put the bottles in the microwave for 10 seconds.  This makes them less viscous and easy to pour.  Of course, when warmed, the densities are quite different.  Therefore, one must use tiny paper or plastic cups to measure out equal volumes.       F.C.
Logged
91 years, but still going
AMA #796  SAM #188  LSF #020

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12668
  • Second in COMMAND
Re: Measuring Epoxy
« Reply #7 on: February 15, 2013, 02:39:27 PM »
So far, I have not had any trouble mixing the "hobby" epoxies by volume.  I know that some of the exotic epoxies require mixing by weight but I don't have any of those right now.

BIG Bear
RNMM/AMM
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline BillLee

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1345
Re: Measuring Epoxy
« Reply #8 on: February 15, 2013, 03:28:12 PM »
Quote from: RandySmith on February 14, 2013, 10:25:32 PM
Most epoxies are to be measured by equal parts, however a few specs call for equal weight, best to check which...

Regards
Randy

Randy,  I think the proper words are "Many epoxies ..." since many are not equal. (Probably most if my investigations into the Shell literature a long time ago is any indication.)  

Now in the world of epoxies for model building ....  :)

Bill
Logged
Bill Lee
AMA 20018

Offline dave siegler

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1172
  • sport flier
    • Circlemasters Flying club
Re: Measuring Epoxy
« Reply #9 on: February 17, 2013, 06:23:44 PM »
from the west systems web site


•Dispensing without Mini Pumps (Weight/volume measure) - To measure 105 Resin and 205 or 206 Hardener by weight or volume, combine five parts resin with one part hardener. To measure 105 Resin and 207 or 209 Hardener by volume, combine three parts resin with one part hardener (by weight, 3.5 parts resin-1 part hardener).

When I did a lot of epoxy work, before pumps I had a 5 - 1 teeter totter
Logged
Dave Siegler
NE9N extra class
AMA 720731
EAA 1231299 UAS Certificate Number FA39HY9ML7  Member of the Milwaukee Circlemasters. A Gold Leader Club for over 25 years!  http://www.circlemasters.com/

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13756
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: Measuring Epoxy
« Reply #10 on: February 17, 2013, 09:50:41 PM »
Quote from: BillLee on February 15, 2013, 03:28:12 PM
Randy,  I think the proper words are "Many epoxies ..." since many are not equal. (Probably most if my investigations into the Shell literature a long time ago is any indication.)  

Now in the world of epoxies for model building ....  :)

Bill



Bill  we are talking about epoxies used by the "modelers" posting here, I was not talking about anything in particular that Shell makes ... or any other specific company makes, I assumed "most" everyone understood I am referring to epoxyies that "most" modelers use. The majority of which mixes one to one...either by weight, or volume,  The important thing is that they find out "how" the glues are to be mixed.

Randy
Logged

Offline Howard Rush

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7966
Re: Measuring Epoxy
« Reply #11 on: February 18, 2013, 01:54:04 AM »
The hard part about using the epoxies that Bill wrote about is finding the name of the company that is making them this week.  I use a couple of them.  Good stuff.

Electronic scales are cheap and good now.  It makes measuring epoxy by weight a lot easier than doing it by volume.  I got one with .01 gm accuracy, and I can make tiny batches.
Logged
The Jive Combat Team
Making combat and stunt great again

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: