Author Topic: Leading edge material (Read 927 times)

Bob Disharoon · « **on:** March 03, 2007, 06:23:51 AM »

Im building a ringmaster..does anyone make preformed leading edges like the old kits used to provide..thnx in advance, BOB

Bill Little · « **Reply #1 on:** March 03, 2007, 06:35:38 AM »

I have gotten some from the hobby shop. I *think* they come from Sig. IIRC, Lone Star also has/had them.

Bob Disharoon · « **Reply #2 on:** March 03, 2007, 05:20:56 PM »

Thanx...found some on Sig..of course after I made them myself on the 1972 Dremel scroll saw from the bay... 95% of the way through this a screw ALMOST backed out and the motor was about to fly thru the wall..stopped it just in time...BOB

Bill Little · « **Reply #3 on:** March 03, 2007, 07:30:59 PM »

Quote from: bob disharoon on March 03, 2007, 05:20:56 PM

Thanx...found some on Sig..of course after I made them myself on the 1972 Dremel scroll saw from the bay... 95% of the way through this a screw ALMOST backed out and the motor was about to fly thru the wall..stopped it just in time...BOB

GREAT SAVE!

Jim Thomerson · « **Reply #4 on:** March 04, 2007, 06:37:18 AM »

Here is a great opportunity for you to try a molded leading edge. Where did I see the post on building Ringmasters with molded leading edges?

Author Topic: Leading edge material (Read 927 times)

Bob Disharoon

Leading edge material

Bill Little

Re: Leading edge material

Bob Disharoon

Re: Leading edge material

Bill Little

Re: Leading edge material

Jim Thomerson

Re: Leading edge material