Building Tips and technical articles. > Building techniques

Jetco Dolphin Laser Cut kit

<< < (2/10) > >>

Juan Valentin:
more pics.

tom brightbill:
Beautiful, keep it coming!

Juan Valentin:
        A few more pics Showing the flap horn since I wanted to be able to do adjustments I placed my bellcrank glued to the top spar that way the flap pushrod comes out of the bottom of the wing and I`m going to have a hatch to do adjustments in the bottom of the fuse. To be able to do that my flap horn has two arms to be able to have a pushrod going to the elevator horn on the bottom also.
                                                                                                            Juan

Juan Valentin:
A few more pics. These show the elevator hatch I reinforced the area with some 1/64 ply on both sides of the fuse. The elevator pushrod is 3/16 carbon fiber with titanium ends and dubro ball links. I also made a CF pushrod to use from the bellcrank to flaps.
                                Juan

Bill Little:
Hi Juan,

Excellent workmanship you're doing!  The Dolphin is a "solid" airplane.  What engine are you using?

Thanks!

BIG Bear
RNMM/AMM

Navigation

[0] Message Index

[#] Next page

[*] Previous page