I use thin CA myself,,
I generally align the fuse and wing,, put a tack where the wood touches,, ( we all know there will be some gaps, ,even small,,) then I recheck alignment,, another tack,, repeat for a couple times,, then I take scrap balsa from my junk drawer,, sand it to fit the gaps carefully,, and CA that in place,, takes a bit of time, but hey, balsa is lighter than epoxy,, and if CA will hold the ribs, spars, and shear webs,, pretty sure its good for the wing joint too,, but only if you use balsa filler,,
I did this on the avenger,, it has a fair number of flights,, several hundred,, and there is no sign of fatigue cracking or issues,,