Seems I remember reading a thread on how to build a foam wing. Or maybe it was on a web site?
Anybody know of a good web source for a step by step on how to put two wing panels together?
Bell crank install, lead outs, sheeting.
Thanks
Paul

How about sharing with the rest of the community. Can't get much from INFO SENT.

Paul,

Here is a very comprehensive outline of building a foam wing written by Dan Winship, a topnotch builder.

     http://winshipmodels.tripod.com/foam_wings.htm

Most every detail that you can image has been covered here.

Don't forget to use the *search* functions on all forums, and of course, run a search in Google.  You will probably get more information than you really want.

Here is another source of information on foam wing construction.  It's a video by world class builder , Bob Noll.  Unfortunately, it will not answer your questions about bellcrank installation, etc. as it is oriented towards RC.   Still, it is suberb information and a 'must see' video for your collection.

      http://www.airbornemedia.com/store/rv-fwing1.htm

Cheers.

Warren Wagner

p.s.   When I added the second hot link, the first one refuses to work.  Just  "Copy and Paste" the first link into the Address window on your browser.

Peabody is correct, I bought Windy's 4 tape set on foam wings and as a bonus he sent me the 2 tape set he did with Scott Smith. The tapes are dirrected at the first timer in foam wings and is loaded with the basics. 5 Star material.