Author Topic: Bellcrank mod (Read 1355 times)

Tim Chenevert · « **on:** March 04, 2018, 07:26:59 PM »

I need a push rod hole 7/16” from the pivot point on a bellcrank. Can the rest of the push rod arm be cut away to save space? This is a nylon Brodak bellcrank. The bellcrank needs to move more towards the centerline. Thanks, Tim

john e. holliday · « **Reply #1 on:** March 04, 2018, 07:54:18 PM »

I just did that to a Brodak Nylon that the pushrod arm was too long. Make sure you don't cut too close to the push rod.

Tim Chenevert · « **Reply #2 on:** March 04, 2018, 08:08:33 PM »

Thanks John. Tim

Dane Martin · « **Reply #3 on:** March 05, 2018, 04:29:09 PM »

Agreed. Leave what you can, but no problems cutting away what's unused.

Tim Chenevert · « **Reply #4 on:** March 05, 2018, 07:31:01 PM »

Done deal and it works great! Thanks, Tim

Author Topic: Bellcrank mod (Read 1355 times)

Tim Chenevert

Bellcrank mod

john e. holliday

Re: Bellcrank mod

Tim Chenevert

Re: Bellcrank mod

Dane Martin

Re: Bellcrank mod

Tim Chenevert

Re: Bellcrank mod