News:


  • April 27, 2024, 01:30:06 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: New cnc mufflers  (Read 4118 times)

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
New cnc mufflers
« on: November 19, 2007, 10:57:08 AM »
HI Everyone

I have new cnc tongue mufflers for the ENYA 60 and others with 42mm  bolt span
Also all CNC tongue mufflers are back in stock, Plus new ones for the ST G-34

Regards
Randy

www.aeroproduct.net
Logged

Offline Allan Perret

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1892
  • Proverbs
Re: New cnc mufflers
« Reply #1 on: January 09, 2008, 08:50:23 AM »
Do you have tongue muffler for Enya XZS 40?
 #^
Logged
Allan Perret
AMA 302406
Slidell, Louisiana

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: New cnc mufflers
« Reply #2 on: January 09, 2008, 07:23:35 PM »
Quote from: Allan Perret on January 09, 2008, 08:50:23 AM
Do you have tongue muffler for Enya XZS 40?
 #^

Allan  I do not have the 40 XZS in stock yet, what are the  hole spacings on the case for the muffler?
Should be just shy of 1.40 inches

The web site shows that it takes the same muffler as a 35SS  if that is so I have a muffler for it both cnc tongue or  cnc Tube. It will use the  Thunder Tiger, Aero Tiger, Magnum 36 mufflers

Randy
Logged

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: New cnc mufflers
« Reply #3 on: January 10, 2008, 02:53:11 PM »
The new  CNC  tube muffler  for tHe ENYA 61 CXS Pro  are now in stock, this motor has a  42mm span on teh bolts

Randy
Logged

Offline Allan Perret

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1892
  • Proverbs
Re: New cnc mufflers
« Reply #4 on: January 12, 2008, 09:48:21 AM »
Yes, I'm showing about 1.38" on the spacing of mounting bolts.
So what are the prices and weights of the tongue and tube you have?
Logged
Allan Perret
AMA 302406
Slidell, Louisiana

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: New cnc mufflers
« Reply #5 on: January 12, 2008, 02:39:56 PM »
Quote from: Allan Perret on January 12, 2008, 09:48:21 AM
Yes, I'm showing about 1.38" on the spacing of mounting bolts.
So what are the prices and weights of the tongue and tube you have?


HI Allan

My tongue mufflers  are high quality  CNC products and weigh about the same  as all the others out there. depends on which one you are asking about, the Brodak 40 tongue is the lightest, the ENYA 60 is the heaviest .5 ounce is average

My CNC product TUBE mufflers  are  very light and weigh just a little over 1 ounce, they  have  no front or rear caps to blowout or come loose

the  Aero Tongue mufflers  are 18.95
the CNC Aero Tubes are 39.95

Regards
Randy
Logged

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: New cnc mufflers
« Reply #6 on: March 05, 2008, 03:53:38 PM »
Randy - I would like 2 of the tube mufflers for the 61CXS pro

should I just order through your website?
Logged
In the battle of airplane versus ground, the ground is yet to lose

wingpro

  • Guest
  • Trade Count: (0)
Re: New cnc mufflers
« Reply #7 on: April 23, 2008, 09:22:19 PM »
Quote from: RandySmith on November 19, 2007, 10:57:08 AM
HI Everyone

I have new cnc tongue mufflers for the ENYA 60 and others with 42mm  bolt span
Also all CNC tongue mufflers are back in stock, Plus new ones for the ST G-34

Regards
Randy

www.aeroproduct.net

Dear Randy,

My engine is ENYA 45SM, I need a tube muffler which screw spacing is also 42mm.

Does your muffler come with a "fixing belt"(strap) for ENYA old style engine such as 45SM?

Thanks.

wingpro
Logged

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: New cnc mufflers
« Reply #8 on: April 24, 2008, 01:45:14 PM »
Quote from: wingpro on April 23, 2008, 09:22:19 PM
Dear Randy,

My engine is ENYA 45SM, I need a tube muffler which screw spacing is also 42mm.

Does your muffler come with a "fixing belt"(strap) for ENYA old style engine such as 45SM?

Thanks.

wingpro

HI

I have both cnc tube and tongue mufflers in stock for the 42MM  spacing of the ENYA bolt on. I do not have straps, but it is a very simple matter to pick one up at the local auto parts store, a stainless steel worm drive radiator strap will work with either of my mufflers, just let me know you are using a strap and I will send along 2 of the  4-40 x 1\4 inch bolt.
You simply open , or cut the strap in the middle,  and bolt each loose end to the back side of the tapped muffler.

Regards
Randy
Logged

wingpro

  • Guest
  • Trade Count: (0)
Re: New cnc mufflers
« Reply #9 on: April 24, 2008, 11:58:37 PM »
Quote from: RandySmith on April 24, 2008, 01:45:14 PM
HI

I have both cnc tube and tongue mufflers in stock for the 42MM  spacing of the ENYA bolt on. I do not have straps, but it is a very simple matter to pick one up at the local auto parts store, a stainless steel worm drive radiator strap will work with either of my mufflers, just let me know you are using a strap and I will send along 2 of the  4-40 x 1\4 inch bolt.
You simply open , or cut the strap in the middle,  and bolt each loose end to the back side of the tapped muffler.

Regards
Randy

Dear Randy,

Thanks for your detail information.

I will place my order by mail to you later.

wingpro
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here