Author Topic: Enya 61 CXS pro Ringed Rear Ex Model (Read 3320 times)

Stan Bidowski · « **on:** April 03, 2010, 03:43:19 PM »

Hi Randy, I'd like to know some more about this engine. Does the Enya 61 CXS pro Ringed Rear Ex Model come with a muffler, or is one available?
Are there headers for it available? What rise(s)? Do other engine headers fit the Enya?
Does it make a good piped engine? Would the piped Enya's performance be comparible
to a PA .61 on pipe? Would an unpiped Enya's power/run be comparible to, say, an ST 60 in unpiped mode?
The Enya website does not have a picture of the rear exhaust 61. Can you please post some?
Are the specs different then the side exhaust version- weight, timing, etc?
Does it mount in the same holes as another engine, say an ST 60, or older model Enyas?

Stan Bidowski

RandySmith · « **Reply #1 on:** April 03, 2010, 05:19:47 PM »

Quote from: Stan Bidowski on April 03, 2010, 03:43:19 PM

Hi Randy, I'd like to know some more about this engine. Does the Enya 61 CXS pro Ringed Rear Ex Model come with a muffler, or is one available?
Are there headers for it available? What rise(s)? Do other engine headers fit the Enya?
Does it make a good piped engine? Would the piped Enya's performance be comparible
to a PA .61 on pipe? Would an unpiped Enya's power/run be comparible to, say, an ST 60 in unpiped mode?
The Enya website does not have a picture of the rear exhaust 61. Can you please post some?
Are the specs different then the side exhaust version- weight, timing, etc?
Does it mount in the same holes as another engine, say an ST 60, or older model Enyas?

Stan Bidowski

Hi Stan

The new Enya 60 RE is the same basic motor as the 61 SE.
It does not come with a muffler. however Enya says they will have one soon, I have one now, I have headers 1.25 rise, and slide on cnc Aero Tube mufflers.
the motor makes Good power and works with a muffler or pipe, I would use a pipe if I were to have one in a ship, and I may put one in a SV-11 ARC very soon, The Enya has a little more Power than a good ST60

Regards
Randy

Allan Perret · « **Reply #2 on:** May 06, 2010, 08:04:18 AM »

Quote from: RandySmith on April 03, 2010, 05:19:47 PM

Hi Stan

The new Enya 60 RE is the same basic motor as the 61 SE.
It does not come with a muffler. however Enya says they will have one soon, I have one now, I have headers 1.25 rise, and slide on cnc Aero Tube mufflers.
the motor makes Good power and works with a muffler or pipe, I would use a pipe if I were to have one in a ship, and I may put one in a SV-11 ARC very soon, The Enya has a little more Power than a good ST60

Regards
Randy

Hey Randy:
"The Enya has a little more Power than a good ST60"

The Enya you were testing here was it the side exhaust with muffler, or the rear exhause with pipe ?

RandySmith · « **Reply #3 on:** May 07, 2010, 07:52:54 AM »

Hi

I tested and ran both of the side and rear versions

Randy

Stan Bidowski · « **Reply #4 on:** May 09, 2010, 10:10:53 AM »

Randy, I'd like to hear more about these Enya's when you've had the chance
to use them in a plane, in the air. A piped rear exhaust Enya 61 in a SV-11
ARF is a couple of unknowns I'd like to know more about! This could be a
very nice combination once the correct setup is found.

Stan Bidowski