Author Topic: coppier stretch (Read 5687 times)

kenny stevens · « **on:** September 26, 2013, 05:33:11 PM »

Hi Randy Just had SV-22 plans copied at FED EX store and the plans were stretched 1/4 inch .. They tried some things that did not work. I need the nose and tail moment for SV-22 as this may have been happening for years but I usually check. Kenny

RandySmith · « **Reply #1 on:** September 26, 2013, 11:57:41 PM »

Quote from: kenny stevens on September 26, 2013, 05:33:11 PM

Hi Randy Just had SV-22 plans copied at FED EX store and the plans were stretched 1/4 inch .. They tried some things that did not work. I need the nose and tail moment for SV-22 as this may have been happening for years but I usually check. Kenny

Hi Kenny

The tail is 17.5 inches , nose is 10.3 inches

Randy

kenny stevens · « **Reply #2 on:** September 27, 2013, 07:49:21 AM »

Thanks Randy

Paul Taylor · « **Reply #3 on:** December 24, 2013, 05:34:01 PM »

So for those of us who are still learning.

That is nose ring to flap hinge and flap hinge to elevator hinge line?

Dick Pacini · « **Reply #4 on:** December 25, 2013, 02:31:19 AM »

Quote from: Paul Taylor on December 24, 2013, 05:34:01 PM

So for those of us who are still learning.

That is nose ring to flap hinge and flap hinge to elevator hinge line?

I believe it is the nose ring to the leading edge and the flap hinge to the elevator hinge.

Paul Taylor · « **Reply #5 on:** December 25, 2013, 07:31:53 AM »

Thanks.
Still learning.

Author Topic: coppier stretch (Read 5687 times)

kenny stevens

coppier stretch

RandySmith

Re: coppier stretch

kenny stevens

Re: coppier stretch

Paul Taylor

Re: coppier stretch

Dick Pacini

Re: coppier stretch

Paul Taylor

Re: coppier stretch