Author Topic: Toronado prop (Read 1116 times)

Russell Shaffer · « **on:** June 03, 2007, 04:58:52 PM »

Anyone have a use for nice white Tornado three blade 6-3 tractor? It has been mounted and run, but it never flew. I was trying to get some thrust out of an OK .074. Yep, it was a lost cause. I'll mail it to the first person who wants it.

Bill Little · « **Reply #1 on:** June 03, 2007, 09:25:40 PM »

Hi Russelll,

Please check your PM.

Thanks
Bill <><

Ralph Wenzel (d) · « **Reply #2 on:** June 03, 2007, 09:48:06 PM »

Hi Russell,
My opinion of the old OK's is about the same as yours. However, you should contact Larry Renger, aka DesignMan, regarding those things. I watched him rework an OK at a club meeting once, and he said it would then perform (to the best of my memory) about as well as a BabyBee! It wasn't terribly involved, either.

Russell Shaffer · « **Reply #3 on:** June 03, 2007, 10:21:45 PM »

Sold to Bill.

George · « **Reply #4 on:** June 04, 2007, 07:59:43 AM »

Russell,

Give us more particulars on the Cub .074. It's a low compression engine and you need ~25% nitro, etc.

George

Russell Shaffer · « **Reply #5 on:** June 05, 2007, 06:01:02 PM »

It's low compression, all right. It never did have the power of a standard Babe Bee. It's been run quite a lot and the bushing is very loose, so maybe high nitro wouldn't be too good for it.

Author Topic: Toronado prop (Read 1116 times)

Russell Shaffer

Toronado prop

Bill Little

Re: Toronado prop

Ralph Wenzel (d)

Re: Toronado prop

Russell Shaffer

Re: Toronado prop

George

Re: Toronado prop

Russell Shaffer

Re: Toronado prop