News:


  • May 20, 2024, 06:10:29 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Revup type 1/2A spinners  (Read 1486 times)

Offline Jim Thomerson

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2087
Revup type 1/2A spinners
« on: March 22, 2008, 07:31:35 PM »
Jim Lee has some made up from Revup cones and new point, backplate, adapter nut, etc.  He has 1 inch and maybe 1 1/8 (don't recall.) Probably should tell him what engine it is for.   
Logged

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12671
  • Second in COMMAND
Re: Revup type 1/2A spinners
« Reply #1 on: March 22, 2008, 07:43:36 PM »
Hi Jim,

Mr. Lee sent me a prototype a few weeks ago.  It is awesome, and mine was made to use on a Norvel .061.  really sharp item!  They are only 1" as those are the only cones he has.
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline minnesotamodeler

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2335
  • Me and my Chief Engineer
    • Minnesotamodeler
Re: Revup type 1/2A spinners
« Reply #2 on: March 22, 2008, 09:52:04 PM »
Who, where, how much?  PIctures??
Logged
--Ray 
Roseville MN (St. Paul suburb, Arctic Circle)
AMA902472

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12671
  • Second in COMMAND
Re: Revup type 1/2A spinners
« Reply #3 on: March 22, 2008, 11:00:14 PM »
Hi Ray, I posted some pictures.  I think under Jim's section in the Vendor's Corner.  IIRC, the cost is to be $25 plus shipping.  They are spun aluminum like the old Froom.
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12671
  • Second in COMMAND
Re: Revup type 1/2A spinners
« Reply #4 on: March 22, 2008, 11:04:51 PM »

EDIT: found this:
Quote
Half A spinners
« on: November 20, 2007, 08:30:04 PM »
   Reply with quoteQuote Modify messageModify Remove messageRemove Split TopicSplit Topic
Check out the latest product in stock.
One inch diameter spinners.
Spun aluminum cone with a turned backplate from 6061- T-6 alloy.  The nose piece has a 1/16" cross hole to tighten, with a 5-40 stud to fit into the supplied union nut.  These are fit together as a set.
No prop cut outs.  The assembly weighs just under a quarter of an ounce.
Price is $20 with $2 shipping
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline James Lee

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 615
Re: Revup type 1/2A spinners
« Reply #5 on: April 08, 2008, 01:02:35 PM »
I now have these with 3mm x 0.5 threds for the Norvel..   I will be doing the 4mm x 0.7 threads as soon as I can find my roun tuits....
Thanks
Jim Lee
Lee Machine Shop
PS sorry the shipping has gone to $3 for the spinners
Logged

Offline James Lee

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 615
Re: Revup type 1/2A spinners
« Reply #6 on: April 28, 2008, 03:17:02 PM »
Hi All
I now have the 1" spinners with 5 x40 (Cox, etc), 3mm x 0.5 (Norvel) and 4mm x 0.70 (AP Wasp)
$20 plus $3 shipping
thanks
Jim Lee
Lee Machine Shop
Logged

Offline minnesotamodeler

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2335
  • Me and my Chief Engineer
    • Minnesotamodeler
Re: Revup type 1/2A spinners
« Reply #7 on: April 29, 2008, 01:52:10 AM »
Great, good to have a source, thanks James.
Logged
--Ray 
Roseville MN (St. Paul suburb, Arctic Circle)
AMA902472

Online Dick Byron

  • Vendor
  • Trade Count: (0)
  • Captain
  • ***
  • Posts: 516
Re: Revup type 1/2A spinners
« Reply #8 on: May 20, 2008, 06:22:58 PM »
I have 2 for the wasp and they are great.
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here