Author Topic: Norvel NVX Fuel (Read 745 times)

John Castle · « **on:** November 16, 2009, 10:33:38 AM »

I picked up a quart of Norvel NVX 35% fuel. The label says 35% nitro and 18% Klotz oil. I want to use this in all of my engines both Norvel and Cox so I think I need to ad some castor oil to it. Being math challenged I was hoping for some guidance on how much castor oil to add. Any suggestions?

Thanks

John Crocker · « **Reply #1 on:** November 16, 2009, 12:48:15 PM »

I've run it as is in Cox engines with no issues.

Bill Adair · « **Reply #2 on:** November 16, 2009, 01:33:57 PM »

John,

I'd add 1.6oz of Castor oil, to bring total oil to 22 percent.

Here is a link to what I think is the easiest to use program for fuel blending, or adding oil.

http://www.nitrorc.com/default2.asp?Introduction=http://www.nitrorc.com/fuelws

Bill

Pinecone · « **Reply #3 on:** December 23, 2009, 10:14:29 AM »

When I talked to Sig about this fuel (which they blend), they suggested using their Champion fuel instead. Champion line is 50/50 castor and synthetic with a total oil content of 20%.

ray copeland · « **Reply #4 on:** December 23, 2009, 12:34:47 PM »

John, i also have used this in Cox engines with no issues. They only probs i had with this fuel was on overcompressed combat engines blowing a lot of glow plugs.

Author Topic: Norvel NVX Fuel (Read 745 times)

John Castle

Norvel NVX Fuel

John Crocker

Re: Norvel NVX Fuel

Bill Adair

Re: Norvel NVX Fuel

Pinecone

Re: Norvel NVX Fuel

ray copeland

Re: Norvel NVX Fuel