Author Topic: McCoy, Testers, Wen-Mac .049 needle valve Where can you get them (Read 1332 times)

propjobbill · « **on:** January 02, 2008, 02:00:15 AM »

Where can a person get needle valve asemblies to fit these .049 engines. I have several engines with broken needles. Is it possible to get needle valve assemblies to fit these .049 engines. I'm even willing to use other manufactures needle valves if I can find some that will fit.

I'm sure someone here has found a way to fix these broken needles. Can you tell me how to do it.

THANKS

propjobbill · « **Reply #1 on:** January 08, 2008, 11:27:04 AM »

No need to answer now, I have learned that I can make my own from 1/72 machine screws

Bill Heher · « **Reply #2 on:** January 28, 2008, 09:52:01 PM »

I have used the stock Cox N/V assy from the product motors with the plastic back; in the McCoy/Testors. I can't remember if it was a straight swap- or you might have to drill the venturi out a smidge to get the spraybar to fit in.

jamtx · « **Reply #3 on:** January 29, 2008, 08:18:39 AM »

Look here...this might help you.

http://www.texastimers.com/

Author Topic: McCoy, Testers, Wen-Mac .049 needle valve Where can you get them (Read 1332 times)

propjobbill

McCoy, Testers, Wen-Mac .049 needle valve Where can you get them

propjobbill

Re: McCoy, Testers, Wen-Mac .049 needle valve Where can you get them

Bill Heher

Re: McCoy, Testers, Wen-Mac .049 needle valve Where can you get them

jamtx

Re: McCoy, Testers, Wen-Mac .049 needle valve Where can you get them