A few weeks ago I asked for some advice about a TD 049, since I know nothing about half A.
You guys gave me some great advice so I thought I'd share my progress on the project
I’m getting close with this little half A model. Next step is to put it all together, then finish.
This little stuff has been a challenge. mostly to keep from crushing it while I working on it.
The control horns had to be made and they are bullet proof. The wire was supposed to be 1/16th but I grabbed 3/32 and did not notice it until I was done. Not much flex in these babies!
That is why I put on a scab patch of 1/64 ply ,in case I have to tweak them.
All the parts in the picture add up to 5oz