News:



  • June 15, 2024, 01:35:31 PM

Login with username, password and session length

Author Topic: HALF A FLYER MAG. SENT  (Read 1773 times)

Offline LARRY RICE

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1291
HALF A FLYER MAG. SENT
« on: April 05, 2011, 10:23:38 AM »
All Half A Flyer magazines have been sent.  Hard copies went out yesterday and the PDF copies went out just now.  If you subscribed and did not recieve your issue let me know. 
      I need your feed back!!!

Larry

Online kenneth cook

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1473
Re: HALF A FLYER MAG. SENT
« Reply #1 on: April 05, 2011, 02:28:04 PM »
        Larry, I of all people should've spent a little more time reading the posts concerning this magazine. I'm fascinated by 1/2 A of all types and surely have interest in this magazine. I would also like to contribute information if that's possible as well. I would like to receive this magazine. I hope all that contribute the knowledge on here would be willing to do the same in the magazine. The majority of magazines currently available tend to lean towards the larger flying models. It would be nice to read about several of our models and engines. Could you please provide me with the required information. Ken

Offline LARRY RICE

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1291
Re: HALF A FLYER MAG. SENT
« Reply #2 on: April 05, 2011, 05:03:29 PM »
     HALF A FLYER is offered in two forms: PDF or a Hard Copy.
PDF files are $8.00 for 4 issues plus a free first issue.
Hard Copy is $20.00 (postage included) for 4 issues and a free PDF file.

Payment can be made by Check, Cash or Pay Pal (sent to personal and money owed).
Payment to:
Black Hawk Models
300 East Arbor Street #42
Long Beach, Ca. 90805
larrytheredbaron@AOL.com

Half A Flyer consist of about 24 + pages, we count on input from our readers to increase the size of the magazine.  Each issue has a lead story about someone who is important to control line and half A flying.  Some contributors are Larry Renger, Dick Sarpolus, Walt Musciano, Ray Stone, Den Saxcoburg, myself and more.

Send a E-mail address for a free Pdf.
Larry

Offline john vlna

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1353
Re: HALF A FLYER MAG. SENT
« Reply #3 on: April 05, 2011, 07:45:20 PM »
Larry,
I didn't get the pdf via email. I think I should have yahoo mail is pretty quick.  I did get the first issue ok.
My email is ;
jrplane@yahoo.com
John Vlna

Offline LARRY RICE

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1291
Re: HALF A FLYER MAG. SENT
« Reply #4 on: April 05, 2011, 09:31:58 PM »
John,

     I do not have you listed as a subscriber, did you send in your $8.00?  How did you send it?  With this information I can run a check.

Larry

Offline JamieHolford

  • 2016 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 190
Re: HALF A FLYER MAG. SENT
« Reply #5 on: April 06, 2011, 06:44:17 AM »
Recieved mine. Didnt get to look thru it quite yet!

Offline John Hammonds

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 567
Re: HALF A FLYER MAG. SENT
« Reply #6 on: April 06, 2011, 06:57:18 AM »
Hi Larry,
 Nothing received here yet either.

Payment was made 1st Feb via Paypal I'll send you the Paypal transaction ID via IM if you need it.

Thanks in advance

TTFN
John.
I started out with nothing and still have most of it left.....
Fast, Cheap, Reliable - Choose any 2!
BMFA 165249

Offline LARRY RICE

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1291
Re: HALF A FLYER MAG. SENT
« Reply #7 on: April 06, 2011, 07:12:59 AM »
Sorry I will get that right out to you.
Larry

Offline minnesotamodeler

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2335
  • Me and my Chief Engineer
    • Minnesotamodeler
Re: HALF A FLYER MAG. SENT
« Reply #8 on: April 06, 2011, 10:07:15 AM »
Got mine, and enjoyed it thoroughly.  Esp. that "BarnDoor" article...

--Ray Stone
--Ray 
Roseville MN (St. Paul suburb, Arctic Circle)
AMA902472

Offline LARRY RICE

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1291
Re: HALF A FLYER MAG. SENT
« Reply #9 on: April 06, 2011, 10:14:33 AM »
You know, Ray, I enjoyed this issue a lot too and I am looking forward to the next one.  We are planning a lead story about Leroy Cox, there is a lot that people do not know about him.  I believe there will be an article from Dick Sarpolus with plans for an electric control liner.  I think that the magazine is getting better with every issue.

Larry

Offline John Hammonds

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 567
Re: HALF A FLYER MAG. SENT
« Reply #10 on: April 06, 2011, 12:00:26 PM »
Hi Larry,
Got it now, Thanks.

TTFN
John.
I started out with nothing and still have most of it left.....
Fast, Cheap, Reliable - Choose any 2!
BMFA 165249

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22797
Re: HALF A FLYER MAG. SENT
« Reply #11 on: April 07, 2011, 08:36:22 AM »
Hey Larry I got my issue printed off.  But, I have a question, "Is the Barn Door article complete"?   Looks like a few deminsions for the forward part of the wing and location of bellcrank are missing.   Other than that little complaint of mine it is another great issue.   I love the lead articles and Renger's info on the Cox engines.   Keep up the great work.   H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline minnesotamodeler

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2335
  • Me and my Chief Engineer
    • Minnesotamodeler
Re: HALF A FLYER MAG. SENT
« Reply #12 on: April 08, 2011, 08:13:47 PM »
Hey Larry I got my issue printed off.  But, I have a question, "Is the Barn Door article complete"?   Looks like a few deminsions for the forward part of the wing and location of bellcrank are missing.   Other than that little complaint of mine it is another great issue.   I love the lead articles and Renger's info on the Cox engines.   Keep up the great work.   H^^

That was my doing, I didn't intend the article to be a complete plans-furnished build article.  Probably should have.  Not sure in fact exactly what I had in mind for it, being it was my first attempt at such a thing.  PM me if you'd like a copy of the cutting diagrams, I'll send you one free for nothing. 

--Ray Stone
--Ray 
Roseville MN (St. Paul suburb, Arctic Circle)
AMA902472

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22797
Re: HALF A FLYER MAG. SENT
« Reply #13 on: April 10, 2011, 06:57:48 AM »
Hey Ray, just make it part two with the rest of the details and set up for flying.   Besides you should have my E-Mail, address and other unimportant stuff.  Have the 1/2A Snapper ready for flight.   H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline George

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1468
  • Love people, Use things.
Re: HALF A FLYER MAG. SENT
« Reply #14 on: April 13, 2011, 09:30:33 AM »
A few days ago I was reading this thread and realized that I too had not sent my check, so I wrote the check using the address above and sent it out...'cept I didn't include my email address. As soon as Larry received the check he called (my phone # is on the check) and we got it straightened out.

Lesson learned...make sure you include your email address.

Thanks for the fast response Larry, I received the mag shortly after we spoke.

All: Make sure you read Larry's article about 1/2A carrier...looks like a good club event. Such a simple setup. Sure wish there was a CL club around here!

George
George Bain
AMA 23454


Advertise Here
Tags:
 


Advertise Here