Author Topic: BOS----Builder of the Starter--Make your own 1/2A Starter (Read 1027 times)

Alan Hahn · « **on:** November 25, 2007, 08:36:55 PM »

I built this some years back and it has worked quite well. So look around the basement and see if you might already have most of the junk.
I note that FMA www.fmadirect.com/Products.htm?cat=15
has a pretty cheap motor on sale that could be used (the 600 one). Don't forget to buy some connectors that will fit your battery type.

frank carlisle · « **Reply #1 on:** November 26, 2007, 03:13:48 AM »

I have'nt read the whole file Alan but I did skim over it. Your starter is ingenious. I wish it would have been accepted by the AMA site as I'm sure the guys could use the info.
I particularly like the 7.2 volt battery pack. It seems like it will provide lower RPM so s not to wreck a 1/2A engine. Thankyou.

Author Topic: BOS----Builder of the Starter--Make your own 1/2A Starter (Read 1027 times)

Alan Hahn

BOS----Builder of the Starter--Make your own 1/2A Starter

frank carlisle

Re: BOS----Builder of the Starter--Make your own 1/2A Starter