Author Topic: Aluminum Spinners? (Read 881 times)

John Crocker · « **on:** April 14, 2008, 01:17:54 PM »

Anybody making a decent sized (1" - 1.5") spinner for the AP .061 Wasp yet? I really like the sharp point on the Brodaks, but don't know if it will fit the threads.

http://virginiahobbysport.com/

minnesotamodeler · « **Reply #1 on:** April 15, 2008, 05:27:41 AM »

Apparently not.

Roger Vizioli · « **Reply #2 on:** April 15, 2008, 06:59:31 AM »

Check Lee's machine Shop in Vendors Corner.
Roger V.

Bill Little · « **Reply #3 on:** April 15, 2008, 07:24:01 AM »

http://stunthanger.com/smf/index.php?topic=7398.0

They are really sweet! I got a prototype that Jim made the adapter for a Norvel, so I am guessing a Wasp adapter is possible, too. Maybe the Norvel has the same threads??

James Lee · « **Reply #4 on:** April 15, 2008, 07:50:21 AM »

The hardware for the AP 061 is on the next to do list.... 2 -3 weeks or so.....

Send me an email and I will get you on the list

thanks
Jim Lee

John Crocker · « **Reply #5 on:** April 15, 2008, 08:40:29 AM »

Thanks James

Author Topic: Aluminum Spinners? (Read 881 times)

John Crocker

Aluminum Spinners?

minnesotamodeler

Re: Aluminum Spinners?

Roger Vizioli

Re: Aluminum Spinners?

Bill Little

Re: Aluminum Spinners?

James Lee

Re: Aluminum Spinners?

John Crocker

Re: Aluminum Spinners?