Jerry, i don't know anything about the Denver area, but if i knew more about what you need maybe i could help. I patch a lot of "stuff" together to fly my 1/2a's. Ray

Here's some of what you're looking for:

http://snipurl.com/9igp

--Ray
Minnesotamodeler

Jerry, this is my starting setup. Super glue reinforement to sides of Sullivan clip. Battery box is from Radio Shack, uses 2AA for 2.4 volts, hot enough to get a flooded engine going but not enough amps to hurt the glo plug. I use rechargeable camera batteries and have used this set up all summer . The battery box needs a few drops of epoxy for support on the weak parts inside, obvious when you remove the cover. DuBro also made a Kwik Klip for 1/2a if you can find one. They stay on good, too good for me with engine running!

Sig Mfg. and Brodack both offer 1/2a supplies by mail and sell on line. How did you like the kit?
Larry

I wound up ordering a 1/2A Flying Kit from Brodak, it had fuel, handle, lines, fuling syringe, control horns, glow connector and linkages. Good enough for getting everything I need to get flying. Kit had everything I needed, one stop shopping, just like I was looking for. All for $20. If I get into more 1/2A's I think I would start to gather better supplies as I learn more.