Very pretty!  What is the finish?  What lines and prop do you intend to use?

I have now run 3 AP Wasps, and find that to extract power, you need to let them rev - at least 19K on the ground.  The APS 6x2 and 5.7x3 seem to be the best available props.  If you need still more speed, a Master Airscrew 5.5x4 cut to 5" should work.  A C*x 6x3 proved too much load for mine, dragging the r's down to 14,9K, a number worse than I would expect from a Black Widow.  With a Tornado 5x3, the r's went over 23K, and the air blast was stirring up grass 30 ft away.  Big difference.

Thanks for the compliments friends,

I have APC 5.7 x 3 and 6 x 3 and Master 6 x 3

Starting with 38' lines

The finish is mostly Solarfilm with small amount of paint
around the engine & tank area

will post  more next month , when flown , hopefully still
in one piece!!

Vincent

Many thanks Roger
unfortunately I wont get to read that until
Friday night, different puters, office n home
then Saturday morn 04:30 away on holiday
for 8 days
appreciate your attention
will reply direct when I get to it

Vincent