News:



  • June 17, 2024, 09:37:27 AM

Login with username, password and session length

Author Topic: Flying Fool  (Read 8142 times)

Offline Terry Bolin

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 428
  • Havin' the time of our lives!
Flying Fool
« on: October 23, 2010, 03:14:57 PM »
Do anyone know of someone who has drawn a set of plans for the Flying Fool?
Thanks, Terry

Online Bill Morell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 956
Re: Flying Fool
« Reply #1 on: October 23, 2010, 05:17:40 PM »
All I have are the splendid? plans that Sterling provided.
Bill Morell
It wasn't that you could and others couldn't, its that you did and others didn't.
Vietnam 72-73
  Better to have it and not need it than it is to need it and not have it.

Offline Jerry Leuty

  • AMA Member
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 192
Re: Flying Fool
« Reply #2 on: October 23, 2010, 07:49:47 PM »
Unless you are wanting to build a Flying Fool for nostalgia purposes I cannot imagine why you would want a set of plans to this horrible flying ship. Brodak kits a 38 Special biplane that is pretty good flying. You could build up the fuselage and get a pretty good plane out of it. But we all have a child hood memory of a plane from that era. I would love to have my '55 Chevy back again. Heaven for me would be to have my special lady with me in my 2 dr. hardtop Bel Air, listening to old tunes on the radio and crusin' some local drive inns. In Fort Worth we use to have at least half dozen places to cruise on a Friday night. My wife says they use to cruise Broadway in Hobbs, NM back in the 60s. We went back there a couple of years ago and drove the abandoned strip. It was some fun reliving her memories after all these years............enjoy your building.

Jerry

Offline JamieHolford

  • 2016 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 190
Re: Flying Fool
« Reply #3 on: October 23, 2010, 08:07:14 PM »
I too am lookin for a set. My dad has one from the old days and he wants to rebuild it. Said it wa a stunt SOB but thts his word.

Offline jim ivey

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 347
Re: Flying Fool
« Reply #4 on: October 23, 2010, 09:24:00 PM »
Would you be listening to "nervous norvis"   singin "Ape Call"  #1 song in dallas summer 1956. otherside was "transfusion"

Offline Terry Bolin

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 428
  • Havin' the time of our lives!
Re: Flying Fool
« Reply #5 on: October 23, 2010, 10:37:52 PM »
Same thing for me, I have a close friend who used to have some of the Sterling FF and wanted to re-visit that plane...
Thanks anyway.

Offline jim ivey

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 347
Re: Flying Fool
« Reply #6 on: October 24, 2010, 12:57:04 AM »
Build a manx cat.   It flies pretty ngood for a bipe. i think I saw short kits for sale on line. jim

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22797
Re: Flying Fool
« Reply #7 on: October 24, 2010, 11:55:18 AM »
There was a gentleman in Fargo ND flying a Flying Fool in stunt the year I got to attend their contest.  He wasn't doing too bad either.  It is not a bad flying ship if the leadouts are moved forward a bit and balanced accordingly.  Not a NATS winner, but a fun plane to play around with. 
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Glenn (Gravitywell) Reach

  • Gravitywell
  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1391
Re: Flying Fool
« Reply #8 on: October 24, 2010, 01:34:54 PM »
I have an old kit plan that someone sent me (sorry I can't remember his name) but it is cut up and the templates that were on the plan are missing.  If someone could please scan and email them to me I would be very appreciative. H^^
Glenn Reach
Westlock, Alberta
gravitywell2011 @ gmail . com

Offline Jim Kraft

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3413
  • AMA78415
Re: Flying Fool
« Reply #9 on: October 24, 2010, 08:57:27 PM »
There is a post over on R/C Groups in the control line section, of a guy that is building a Fool, and I think he is selling plans for it on a cd. You might want to check it out. Said he had a kit and drew the plans from the kit pieces.
Jim Kraft

Offline JamieHolford

  • 2016 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 190
Re: Flying Fool
« Reply #10 on: October 25, 2010, 12:30:06 AM »
Yea I seen that post and was following his rebuild. But $20 for a cd is a bit steep for me. Now if he would go to kinkos and print them out I would spend 10-15 :)  but $20 for a cd and then taking it to kinkos and spending no telling how much more for it to be printed would probably be around another 20 or so ( dont know never done it) so it be like paying $40 or so for plans when I could have gotten a Mongoose or something :D

Offline wwwarbird

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7988
  • Welcome to the Stunt Hanger.
Re: Flying Fool
« Reply #11 on: October 25, 2010, 01:31:55 AM »
There is a post over on R/C Groups in the control line section, of a guy that is building a Fool, and I think he is selling plans for it on a cd. You might want to check it out. Said he had a kit and drew the plans from the kit pieces.

 What site is it?
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Offline Jim Kraft

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3413
  • AMA78415
Re: Flying Fool
« Reply #12 on: October 25, 2010, 06:00:55 AM »
Just google R/C Groups. I think it is rcgroups.com. If you google it, it will come up first thing on the list. Then scroll down to the control line forum.
Jim Kraft

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: Flying Fool
« Reply #13 on: October 25, 2010, 12:40:13 PM »
I can e-mail them to you - they are full size scans so take them to a copy shop and get them printed
In the battle of airplane versus ground, the ground is yet to lose

Offline JamieHolford

  • 2016 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 190
Re: Flying Fool
« Reply #14 on: October 25, 2010, 12:41:46 PM »
hit me up    cajunpoker1@yahoo.com

Thanks

Offline JamieHolford

  • 2016 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 190
Re: Flying Fool
« Reply #15 on: October 25, 2010, 08:04:56 PM »
Wynn I got your email.. Thanks!!

Offline Glenn (Gravitywell) Reach

  • Gravitywell
  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1391
Re: Flying Fool
« Reply #16 on: October 25, 2010, 10:28:54 PM »
I got your email as well Wynne...thank you very much! H^^
Glenn Reach
Westlock, Alberta
gravitywell2011 @ gmail . com

larry borden

  • Guest
  • Trade Count: (0)
Re: Flying Fool
« Reply #17 on: October 26, 2010, 06:27:35 PM »
If possible could you email me the plans? bbird@msn.com


Advertise Here
Tags:
 


Advertise Here