stunthanger.com
Vendors Corner => U/Tronics Control => Topic started by: Clancy Arnold on December 01, 2006, 08:01:43 PM
-
U/Tronics Controls provide electronic control of functions through your flying lines.
Single Channel for two lines, Dual channel for three lines or multi channel up to seven servos for two lines.
The photos show the units I provide and a typical installation in a handle.
I provide the electronics. You provide the batteries, servos, box and controls. Pots are provided with the single and dual channel units.
Clancy Arnold
4006 Eagle Cove Court
Indianapolis, IN
46254
(317) 387-1940
-
Clancy;
You should post a price list. I know you have the best prices on these type of systems I have seen.
Leroy
-
Thanks Leroy
Price list:
Single channel for 2 lines with pot ---- $20.00
E-NC Special, Single Channel without pot -----$15.00
(use with a three line bellcrank for Electric Navy Carrier)
Multi channel for 2 lines, Encoder
and Decoder for 4 channels ------------ $80.00
Extra Decoders for additional planes -----$40.00
Additional channels up to 7 total ----- $5.00 each
10K slide pots ---------------------------- $5.00 each
Shipping per order ---------------------- $3.00
Clancy
-
Does this system use regular steel lines, or must they
be insulated from contact with eachother?
Thanks, Stan :)
-
Stan
Insulated lines are greatly preferred. That way you have eliminated the chance of loosing electronic control of functions in your model.
A second advantage is that you can bring the handle back to the model when ready to start engines, allowing you to have throttle control at all times.
Insulated lines are available from Brodak.
Clancy
-
The dual channel unit has been discontinued.
Clancy
-
Clancy Arnold,
%^@ ???I would like to know the cost of sending of the system of 7 channels and the cables of 21 meters to Rio de Janeiro, Brazil, and if the payment can be made with international credit card.
I apologize for the possible spelling mistakes, but I use a translator because my English is weak.
A great hug
Luiz Roberto
www.f4b.vcc.nom.br D>K
-
Beto
I will have to check the requirements for me to ship to Brazil. This may take a few days.
The cost would be my standard price plus shipping costs.
Clancy
-
;D Clancy,
I will be in I await him/it anxious, when you has the costs to sends for
my e-mail: spitrj@hotmail.com.
A great hug
Beto climbs 8) #^
-
Beto,
I have sent you an E-mail quoting price to Brazil.
Insulated flying lines are available from Brodak Mfg.
An additional customs fee may be required when units arive in Reo de Janeiro, Brazil.
Clancy