stunthanger.com
Vendors Corner => U/Tronics Control => Topic started by: Clancy Arnold on November 14, 2011, 06:50:38 AM
-
There has been a discusion about problems using U/Tronics with Electric power.
The main problem revolves around the range of inputs that a typical ESC will accept. The Single channel U/Tronics Control unit was designed to work with standard Analog (not Digital) Servos. This allowed the modeler to move the servo more than 90 degrees. ESC's require a tighter range of inputs therefore we have added information to adjust the range of pulse widths available from the U/Tronics units.
The second sketch shows how to add an Engine Kill switch for a Glow powered model.
Clancy