Advertise Here

  • December 10, 2023, 12:57:24 PM

Login with username, password and session length

Author Topic: Compatibility and Interchangeability  (Read 3423 times)

Offline Clancy Arnold

  • Moderator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 1454
  • I am 5 Ft. 8 In., the Taube is 7 Ft. 4 In.
Compatibility and Interchangeability
« on: December 27, 2011, 07:25:42 PM »
I was asked if the U/Tronics Control Multi channel systems were matched sets?  

The answer is NO! 

The question was did the modeler have to keep a Handle with Encoder to use only with the Decoder it came with.  He did not want to have to remove the Decoder from one model to use the Handle on a second model or could he use a different Decoder with his present handle?

The design of the Encoder and Decoder make them universally compatible.  In fact you could use a 7 channel Encoder to control a 4 channel Decoder with the limitation of only having 4 useable channels.  you could also use a 4 channel Encoder to control a 7 channel Decoder again with the limitation of only having 4 useable channels.  

I think that makes them Compatible and Interchangeable.

« Last Edit: December 27, 2011, 07:55:53 PM by Clancy Arnold »
Clancy Arnold
Indianapolis, IN   AMA 12560 LM-S
U/Tronics Control
U/Control with electronics added.

Advertise Here

There are no comments for this topic. Do you want to be the first?

Advertise Here