Advertise Here

  • December 01, 2021, 02:06:09 PM

Login with username, password and session length

Author Topic: TUT-HR Available NOW 2021  (Read 405 times)

Offline Tom rammel

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 4
TUT-HR Available NOW 2021
« on: September 07, 2021, 12:41:40 PM »
Tim Wescott is the designer of the TUT-HR and Howard Rush provided the specification.
Tim Wescott is allowing me (Tom Rammel Senior Electronic Engineer) to build the TUT-HR and make it available to those that want to pre-purchase them at an initial cost of $ 75 plus shipping.  These initial builds will only be shipped to the continental US and will have a long lead time due to the chip shortage.

YouTube link: 

If you would like to purchase a TUT-HR send a check to:

Tom Rammel
2502 Oliver Ave SW
Cokato, MN 55321 


« Last Edit: November 14, 2021, 01:26:30 AM by Tom rammel »

Online John Paris

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 586
TUT-HR Available NOW 2021-installation orientation
« Reply #1 on: Yesterday at 08:10:30 AM »
Since this board has sensors on it, orientation will have some importance.  Howard graciously shared a picture of his world beater with a TUT-HR installed.  It is probably best to orient your TUT-HR in a similar manner.  Looks like the board needs to be vertical with the pins facing forward and the electric components facing the pilot (inboard) for people flying the standard CCW rotation.
John Paris

Advertise Here

Advertise Here