stunthanger.com

Design => Stunt design => Topic started by: cygnetsnr on June 08, 2007, 07:18:29 PM

Title: Pull apart mechanisms
Post by: cygnetsnr on June 08, 2007, 07:18:29 PM

Hi guys.

I would like to make my model pull apart and need some help in a  simple desighn. Is there a commercial one available?
I am relatively new to C/line

Cheers  Bill

Title: Re: Pull apart mechanisms
Post by: Steve Helmick on June 08, 2007, 08:47:36 PM

I believe you're looking for "Takeapart" hardware, to make a model with removable wings or two piece fuselage?
Controline Central is supposed to have these parts available in their "Tom Morris" hardware. I looked, but didn't find it. Contact Jim Snelson by email. Here's the website:  http://www.clcentral.com/default.asp
 D>K Steve

Title: Re: Pull apart mechanisms
Post by: cygnetsnr on June 09, 2007, 11:03:20 PM

Hi Steve
Thank you for answering my First ever post. I will check the site you have given me.
 Again thank you.

Cheers   
Bill

Title: Re: Pull apart mechanisms
Post by: john e. holliday on June 15, 2007, 06:51:41 AM

If Jim doesn't have them, then contact Tom Morris.  Have fun,  DOC Holliday

Title: Re: Pull apart mechanisms
Post by: Rudy Taube on June 15, 2007, 09:44:38 PM

Bill,

If you need really small parts then use the Tom Morris system. If you just need the wing and tail off, then use the inexpensive, KIS system we use on all our R/C planes.

Please see the Open section on this forum under:  "Tom Morris take apart system". I think it is about 20 subjects down? I have posted a very brief How To there.

If you can, go to an R/C flying site and look at any one of their planes. It is very KIS. :-)

If you want a take-a-part profile CL plane, then contact Eric at RMS. he has a perfect, very KIS system built into his latest profile plane.

Title: Re: Pull apart mechanisms
Post by: Leo Mehl on July 06, 2007, 10:09:36 AM

Steve, as you know, most of my models are The break apart variety which then become pull apart. This is a true statement! HB~> HB~> HB~> HB~> HB~>