Author Topic: original Vector (Read 993 times)

Jim Morris · « **on:** September 21, 2007, 12:31:18 PM »

Maybe Randy can answer this best,but I will throw it out there. I am building an original Vector with foam wings.It will be powered by a Stalker 51. Does the wing need a spar or not. I am not sheeting the whole wing. I will be using the Dixon kept foam technique. I realize I need to use a glass cloth reinforcement, but how much and how far out. Thanks

RandySmith · « **Reply #1 on:** September 21, 2007, 01:18:12 PM »

Quote from: Jim Morris on September 21, 2007, 12:31:18 PM

Maybe Randy can answer this best,but I will throw it out there. I am building an original Vector with foam wings.It will be powered by a Stalker 51. Does the wing need a spar or not. I am not sheeting the whole wing. I will be using the Dixon kept foam technique. I realize I need to use a glass cloth reinforcement, but how much and how far out. Thanks

HI Jim

If you are using the kept foam partial sheet method you will have to use a spar, and glass cloth around the center out past the fuse sides

Regards
Randy

Jim Morris · « **Reply #2 on:** September 21, 2007, 05:56:31 PM »

Thanks Randy. Will try that.

Author Topic: original Vector (Read 993 times)

Jim Morris

original Vector

RandySmith

Re: original Vector

Jim Morris

Re: original Vector