stunthanger.com

Design => Stunt design => Topic started by: FLOYD CARTER on July 11, 2015, 01:10:33 PM

Title: Don't copy my designs!
Post by: FLOYD CARTER on July 11, 2015, 01:10:33 PM

Busy building a wing for my new stunter.  Installed bellcrank and leadouts OK.  Then installed the two landing gear blocks in the wing, complete with ply rib doublers to support the block.

Something's not quite right. 

Oh yes.  I had installed the L.G. blocks on the TOP side of the wing.

Floyd

Title: Re: Don't copy my designs!
Post by: Avaiojet on July 11, 2015, 02:08:38 PM

Floyd,

There was this guy that had gear on the bottom and the top of his model, or aircraft.

I don't remember where I saw this? Could have been a full size aircraft used in air shows?

I just cannot remember.

Title: Re: Don't copy my designs!
Post by: Tim Wescott on July 11, 2015, 04:10:56 PM

Time to start flying like Resinger.

Title: Re: Don't copy my designs!
Post by: Gerald Arana on July 11, 2015, 07:22:23 PM

Quote from: FLOYD CARTER on July 11, 2015, 01:10:33 PM

Busy building a wing for my new stunter.  Installed bellcrank and leadouts OK.  Then installed the two landing gear blocks in the wing, complete with ply rib doublers to support the block.

Something's not quite right. 

Oh yes.  I had installed the L.G. blocks on the TOP side of the wing.

Floyd

Floyd, Are you planning upside down landings?  LL~ LL~ LL~

Sorry, I couldn't resist! Actually that is something I'd do!

Cheers, Jerry

Title: Re: Don't copy my designs!
Post by: Jim Carter on July 12, 2015, 08:51:47 AM

 :) Hey!!  What's wrong with being "prepared"!!   ;D

Title: Re: Don't copy my designs!
Post by: FLOYD CARTER on July 12, 2015, 10:14:59 AM

Four wheels are not on my plans.  Too late.  I've already fixed my "boo-boo".  Got to be more careful next time.

Floyd

Title: Re: Don't copy my designs!
Post by: Bill Little on July 12, 2015, 12:10:07 PM

Quote from: Ty Marcucci on July 12, 2015, 11:22:48 AM

You are not alone Floyd. I once built up the entire wing only to discover I'd left out the bell crank and lead outs. Still can't figure out how I did that unless the paint fumes got to me.. D>K LL~ LL~ LL~

Chief,

You just reverted back to your Free Flight days for a while....

BIG Bear
RNMM/AMM

Title: Re: Don't copy my designs!
Post by: Larry Borden on August 03, 2015, 10:08:36 AM

Ringmaster variant, Mirror-Mirror.