News:



  • March 28, 2024, 03:43:59 PM

Login with username, password and session length

Author Topic: Speed spinners  (Read 2139 times)

Offline Tim Stone

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 34
Speed spinners
« on: October 24, 2019, 02:41:27 PM »
   Speed spinners... where to get? All I can find currently available are RC spinners too big for our use.
I guess this is another Ebay scrounge job.  I know all the collecto and forum scrounge tricks. Just are there
any current manufacturers I have missed? I know , buy a lathe, make my own etc.

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2244
Re: Speed spinners
« Reply #1 on: October 24, 2019, 06:31:48 PM »
what size are u looking for
rad racer

Offline bill bischoff

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1698
Re: Speed spinners
« Reply #2 on: October 25, 2019, 06:15:39 AM »
Check with Bill Hughes. He sells some OPS spinners.

Offline Fredvon4

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2099
  • Central Texas
Re: Speed spinners
« Reply #3 on: October 25, 2019, 12:14:02 PM »
Mike Hazel has a long list of spinners on Flying lines org  under flea market.......

http://flyinglines.org
"A good scare teaches more than good advice"

Fred von Gortler IV

Offline Tim Stone

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 34
Re: Speed spinners
« Reply #4 on: October 26, 2019, 03:02:28 PM »
   Thanks to all for your replies.

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2244
Re: Speed spinners
« Reply #5 on: October 27, 2019, 07:18:02 PM »
still don't know what size u r looking for
rad racer

Offline RICHARD HART

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 2
Re: Speed spinners
« Reply #6 on: January 25, 2020, 11:30:38 AM »
I have Slugger Brown's stock of speed spinners with backplates but without collets available. I can make collets if needed. Sizes are F2A/A, B/C and D.


Advertise Here
Tags:
 


Advertise Here