stunthanger.com
Speed,Combat,Scale,Racing => Speed Talk => Topic started by: bob branch on September 05, 2006, 06:52:19 PM
-
I'm hoping someone here can put me on the right trial. I am looking for a speed prop in the 10 to 11 inch dia range with pitch about 10 inches. rpm range is 23 to 24000 rpm. Obviously this is not a control line effort. Its actually for 2 different rc speed efforts. They have come up against a prop barrier and I said I'd check here to see if anyone could lead them to a solution. 12 inch obviously is prohibative due to tip velocities.
Thanks, bob branch
-
you may be able to find some 9x 13 glass props from the hi nitro days. 9" was the longest we used now we run 8" on the 65's
-
Can you tell me who made them?
bob
-
mike hazel up in oregon. known as zz prop. e mail is zzclspeed@aol.com
-
Thanks, that will give a direction to the search.
Now I'll go back to my 55mph stunt world (til friday morning when I go fly my rc pattern plane.... zoooom!)
bob branch
-
Check out Supercool at http://64.6.252.92/
-
I was in our largish LHS on Saturday, and Mejlik (sp?) had props up to 28-10, and $$$, too! I don't remember pitches in the smaller sizes, but they can probably make them . . .
-
Bob
I have some topflight 10 x 8---might rework to 10x 10?
Digging through old speed props i fint the lagest dia in the 10+pitches is 9inch dia.
some apear to be about 9x12+ but most writing is gone from rework or faded from age.
have one more place to look--will look tonight.
David
-
David
Currently the plane is flying with an 11X10 and an 11.5X11 (cut down from 11X11. Onboard airborne telemetry shows 22,300 rpm and 176mph airspeeds. I think going to 10 inches will be a bit small. Thanks though.
bob
-
I recently bought some wood speed props that were supposed to be 9/12 for nostalga speed for my McCoy 60. However, I found 5 Rite Pitch 10/12's mixed in. They are NOS with the original 1/4" hole, ready to be reamed to a usable size. John Contact me directly if interested. imtoolmanjohn@aol.com
I