stunthanger.com
Speed,Combat,Scale,Racing => Speed Talk => Topic started by: bob whitney on May 10, 2017, 07:40:52 AM
-
getting ready to lay up some Perky Props for this year, if there is any intrest I could have some for sale at Brodaks. $10 each or 3 for 425
-
Details? Photo? Size?
Guess you made it home OK. :)
Bill Bischoff
-
Bill, check with your partner ,he has one
slowly working on the molds, just got some carbon today
Bill sorry Hemple has one
-
Bob
I would like a couple props.
Especially for Cox Conquest 15.
Any help on dia and pitch would be greatfull.
Will be at Brodaks. Entering the Sportsman Stunt Speed there.
Carl
-
I ran Cox Conquests in F2D for a long time. Without going all high-tech the prop procedure was to start with a 7/4 that would stay in one piece and trim it down until the engines goes the RPM you want. It seemed like 23,000 was the breaking point for a Conquest. Of course that was for 4-minute runs, not 40 seconds.
Back when we could run unlimited nitro in F2D the Nelsons beat the the Cox because they would tolerate a lot more nitro. But in Perky with 10% nitro and only needing run 40 seconds, a Cox might be a little closer to competitive.
40 seconds is 90 MPH.
-
I have a carbon 7/4 racing prop that would work. will have a couple at brodaks. also a narrow carbon rev-up 7/6 ccopy
-
Thanks Bob
Look for guy with the BLUE #48 ball cap. That will be me.
Carl
-
Bob
I would like a couple props.
Especially for Cox Conquest 15.
Any help on dia and pitch would be greatfull.
Will be at Brodaks. Entering the Sportsman Stunt Speed there.
Carl
APC 6.5x5 is a good starting point.
Al