News:


  • April 17, 2024, 06:08:46 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: 21 profile proto  (Read 992 times)

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2248
21 profile proto
« on: June 18, 2019, 11:48:53 PM »
can the 21 profile proto have a clear finish trimmed in color
Logged
rad racer

Offline Bob Heywood

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 999
Re: 21 profile proto
« Reply #1 on: June 19, 2019, 06:08:54 AM »
Yes.

Glen Van Sant's speedster...
Logged
"Clockwise Forever..."

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2248
Re: 21 profile proto
« Reply #2 on: June 21, 2019, 08:51:52 AM »
meant to ask about the 1/2a proto also
Logged
rad racer

Offline Bob Heywood

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 999
Re: 21 profile proto
« Reply #3 on: June 22, 2019, 06:09:18 AM »
Quote from: bob whitney on June 21, 2019, 08:51:52 AM
meant to ask about the 1/2a proto also

No.

19.1.
Design of 1/2A Proto Speed Model. Proto Speed models need not be scale; however, the design must resemble that of a full scale airplane. Models must have a profile fuselage, rudder or butterfly tail, and a clear cockpit or cabin in proportion to the total model. No pod-and-boom fuselages, flush or prone cockpits, or flying-wing designs will be permitted unless they are scale models of full-scale aircraft. The complete model with the exception of the engine, tank, bellcrank and landing gear must be finished with an opaque paint. The model may also be colorfully trimmed. Clear or tinted finishes that show the color of the construction material are not allowed. Models must satisfy the Control Line General profile definition.
Logged
"Clockwise Forever..."

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here